manualshive.com logo in svg

GreenWorks PSCS06B00, Руководство пользователя

Поделиться
Скачать
GreenWorks PSCS06B00 Скачать руководство пользователя страница 13

13

uNPACKING

This product has been shipped completely assembled.

• 

Carefully remove the product and any accessories from the box. Make sure that all items 

listed in the package contents section are included.

• 

Inspect the product carefully to make sure no breakage or damage occurred during shipping.

• 

Do not discard the packing material until you have carefully inspected and satisfactorily 

operated the product.

• 

If any parts are damaged or missing, please call 1-888-909-6757 for assistance.

PACKING LIST

• 

Chainsaw / Pole saw

• 

Scabbard

• 

Owner’s Mannual

• 

Carrying Bag

W A R N I N G

If any parts are damaged or missing, do not operate this product until the parts are replaced. 

Using a product with damaged or missing parts could result in serious personal injury.

W A R N I N G

Do not attempt to modify this product or create accessories not recommended for use with this 

product. Any such alteration or modification is misuse and could result in a hazardous condition 

leading to possible serious personal injury.

ASSEMBLY

Содержание PSCS06B00































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды