manualshive.com logo in svg

GreenWorks PSCS06B00, Руководство пользователя

Поделиться
Скачать
GreenWorks PSCS06B00 Скачать руководство пользователя страница 11

 

The following signal words and meanings are intended to explain the levels of risk associated 

with this product.

  

DANGER

 

Indicates an imminently hazardous situation, which, if not  

 

 

 

avoided, will result in death or serious injury.

  

WARNING

 

Indicates a potentially hazardous situation, which, if not avoided, 

 

 

 

could result in death or serious injury.

  

CAuTION

 

Indicates a potentially hazardous situation, which, if not avoided, 

 

 

 

may result in minor or moderate injury. 

  

CAuTION

 

(Without Safety Alert Symbol) Indicates a situation that may  

 

 

 

result in property damage.

SYMBOLS

11

SyMBOL     SIGNAL               MEANING

SERvICE

Servicing requires extreme care and knowledge and should be performed only by a qualified 

service technician. for service we suggest you return the product to your nearest AUTHORIZED 

SERVICE CENTER for repair. When servicing, use only identical replacement parts.

W A R N I N G

• Do not use on wet materials.

 

• Disconnect before cleaning or changing accessories.

W A R N I N G

To avoid serious personal injury, do not attempt to use this product until you have read this 

Owner’s Manual thoroughly and understand it completely. If you do not understand the warnings 

and instructions in this Owner’s Manual, do not use this product. Call the Toll-free Helpline (1-

888-909-6757) for assistance.

W A R N I N G

 

 

 

 

 

        

The operation of any power tool can result in foreign objects being thrown into your 

eyes, which can result in severe eye damage. Before operating a power tool, always 

wear safety goggles, safety glasses with side shields, or a full face shield when needed. 

We recommend a Wide Vision Safety Mask for use over eyeglasses or standard safety 

glasses with side shields. Always use eye protection that is marked to comply with ANSI 

Z87.1.

SAvE THESE INSTRuCTIONS

Содержание PSCS06B00































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды