Q
uiCk
r
eferenCe
g
uide
:
MANUAL REGENERATION
NOTE: For softeners, if brine
tank does not contain salt, fill
with salt and wait at least 2
hours before regeneration.
If you need to initiate a
manual regeneration, either
immediately, or the same
night at the preprogrammed
time for regeneration (typically 2:00 AM), complete the following steps.
For Immediate Regeneration: Press and hold
regen
until valve motor
starts (typically 3 seconds).
For Regeneration the same night: Press and release
regen
(notice
that flashing “REGEN TODAY” appears).
ERROR
If the display toggles between “Error”
and an error code (i.e. a number), call
a service technician and report the error
code.
BYPASS VALVE OPERATION
To shut-off water to the system, please position arrow handles as shown
in the bypass operation diagram below. If your valve doesn’t look like the
diagram below, contact your service technician for instructions on how to
shut off water.
NORMAL OPERATION
BYPASS OPERATION
TO SET TIME OF
DAY
In the event of a prolonged
power outage, time of day
flashes, indicating that this
needs to be reset. All other
information will be stored
in memory no matter how
long the power outage.
Please complete the steps
as shown to the right. To
access this mode, press
set
clock
.
1. Accessed by pressing
set
clock
2. Adjust hours with
and buttons, AM/PM
toggles at 12
3. Press
next
4. Adjust minutes with
and buttons
5. Press
next
to complete
and return to normal
operation
1. Accessed by pressing
next
and
s
button
simultaneously
2. Adjust hardness using
t
and
s
buttons
3. Press
next
4. Adjust days between
regenerations using
t
and
s
buttons
5. Press
next
6. Adjust time of
regeneration hour with
t
and
s
buttons, AM/
PM toggles at 12.
7. Press
next
8. Adjust time of
regeneration minutes
with
t
and
s
buttons
9. Press
next
to complete
and return to normal
operation.
ADJUST HARDNESS, DAYS BETWEEN
REGENERATION, OR TIME OF REGENERATION
For initial set-up or to
make adjustments, please
complete the steps as
shown to the right. Access
this mode by pressing
next
and button
simultaneously.
NOTE: Hardness display
shows “-nA-” if used as
a filter. If other displays
do not appear, refer to
manual.
Water Technologies
Water Technologies
Water Technologies
USA: 1270 Flagship Dr. Perrysburg, OH, 43551
Phone: 1-419-874-6770 Fax: 419-874-6769
Canada: 400 Southgate Dr Guelph, ON, N1G 4P5
Phone
:1-888-5-WATER-0
Fax
:519-837-8913
www.greenwaywt.com
REV05-18
GENERAL OPERATION
When the system is operating, one of three displays will be shown: Time of
day, gallons of treated water available, or gallons per minute. Pressing
next
will toggle between the three choices.
