Greenlee Ultra Tugger UT10-22 Скачать руководство пользователя страница 3

Страница: 3 / 116

Ultra Tugger

10 Cable Puller and Pulling Packages

Greenlee Tools, Inc.

4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070

GENERAL SAFETY RULES

WARNING! Read and understand all instructions.

Failure to follow all instructions listed below may result

in electric shock, fire, and/or serious personal injury.

SAVE THESE INSTRUCTIONS

WORK AREA SAFETY
Keep your work area clean and well lit.

Cluttered

benches and dark areas invite accidents.

Do not operate power tools in explosive atmo-

spheres, such as in the presence of flammable

liquids, gases, or dust.

Power tools create sparks

which may ignite the dust or fumes.

Keep bystanders, children, and visitors away while

operating a power tool.

Distractions can cause you to

lose control.

ELECTRICAL SAFETY
Grounded tools must be plugged into an outlet prop-

erly installed and grounded in accordance with all

codes and ordinances. Never remove the grounding

prong or modify the plug in any way. Do not use any

adapter plugs. Check with a qualified electrician if

you are in doubt as to whether the outlet is properly

grounded.

If the tools should electrically malfunction or

break down, grounding provides a low resistance path

to carry electricity away from the user.

Avoid body contact with grounded surfaces such

as pipes, radiators, ranges, and refrigerators.

There

is an increased risk of electric shock if your body is

grounded.

Do not expose power tools to rain or wet conditions.

Water entering a power tool will increase the risk of

electric shock.

Do not abuse the cord. Never use the cord to carry

the tools or pull the plug from an outlet. Keep cord

away from heat, oil, sharp edges or moving parts.

Replace damaged cords immediately.

Damaged

cords increase the risk of electric shock.

When operating a power tool outside, use an

outdoor extension cord marked “W-A” or “W.”

These

cords are rated for outdoor use and reduce the risk of

electric shock.

PERSONAL SAFETY
Stay alert, watch what you are doing and use

common sense when operating a power tool. Do not

use tool while tired or under the influence of drugs,

alcohol, or medication.

A moment of inattention while

operating power tools may result in serious personal

injury.

Dress properly. Do not wear loose clothing or

jewelry. Contain long hair. Keep your hair, clothing,

and gloves away from moving parts.

Loose clothes,

jewelry, or long hair can be caught in moving parts.

Avoid accidental starting. Be sure switch is off

before plugging in.

Carrying tools with your finger on

the switch or plugging in tools that have the switch on

invites accidents.

Remove adjusting keys or switches before turning

the tool on.

A wrench or a key that is left attached to a

rotating part of the tool may result in personal injury.

Do not overreach. Keep proper footing and balance

at all times.

Proper footing and balance enables better

control of the tool in unexpected situations.

Use safety equipment. Always wear eye protection.

Dust mask, non-skid safety shoes, hard hat, or hearing

protection must be used for appropriate conditions.

TOOL USE AND CARE
Use clamps or other practical way to secure and

support the workpiece to a stable platform.

Holding

the work by hand or against your body is unstable and

may lead to loss of control.

Do not force tool. Use the correct tool for your appli-

cation.

The correct tool will do the job better and safer

at the rate for which it was designed.

Do not use tool if switch does not turn it on and off.

Any tool that cannot be controlled with the switch is

dangerous and must be repaired.

Disconnect the plug from the power source before

making any adjustments, changing accessories,

or storing the tool.

Such preventive safety measures

reduce the risk of starting the tool accidentally.

Store idle tools out of reach of children and other

untrained persons.

Tools are dangerous in the hands of

untrained users.

Maintain tools with care. Keep cutting tools sharp

and clean.

Properly maintained tools, with sharp cutting

edges, are less likely to bind and are easier to control.

Check for misalignment or binding of moving parts,

breakage of parts, and any other condition that may

affect the tool’s operation. If damaged, have the tool

serviced before using.

Many accidents are caused by

poorly maintained tools.

Use only accessories that are recommended by the

manufacturer for your model.

Accessories that may

be suitable for one tool may become hazardous when

used on another tool.

SERVICE
Tool service must be performed only by qualified

repair personnel.

Service or maintenance performed by

unqualified personnel could result in a risk of injury.

When servicing a tool, use only identical replace-

ment parts. Follow instructions in the “Maintenance”

section of this manual.

Use of unauthorized parts or

failure to follow maintenance instructions may create a

risk of electric shock or injury.

Содержание Ultra Tugger UT10-22





















































































































Результаты поиска

Содержание Ultra Tugger UT10-22

Отзывы:

Похожие инструкции для Ultra Tugger UT10-22

Бренды по названию

Популярные бренды

Greenlee Ultra Tugger UT10-22, Инструкция по эксплуатации

Результаты поиска

Содержание Ultra Tugger UT10-22

Отзывы:

Похожие инструкции для Ultra Tugger UT10-22

Бренды по названию

Популярные бренды