GREE ELECTRIC DC Inverter U-match Series, Руководство пользователя

Страница: 28 / 65

DC Inverter U-match Series Duct Type Unit
23
nut on the pipe and use a flaring tool to flare the mouth of
connection pipe.
(4) Check whether the flaring part has cracked (See the figure
below).
3.2.3.3 Pipe Bending
(1) The pipes are shaped by your hands. Be careful not to collapse
them.
(2) Do not bend the pipes in an angle more than 90°.
(3) If the pipe is repeatedly bent or extended, it will become hard
and difficult to be bent or extended. So do not bend or extend
the pipe for more than 3 times.
(4) When bending the pipe, do not
bend it excessively, otherwise it
will get broken. As shown beside,
use a sharp cutter to cut the heat
insulating pipe and bend it after
the pipe is exposed. After bending,
place the heat insulating pipe back
on the pipeline and fix it with
adhesive tape.
Pipe
Cutter
Cut line
Heat insulating
pipe