CONV
Parameter
Options
Description
L/Out
On or Off
Permanent lockout for the CONV channel. Also
accessed by pressing
FUNC L/OUT
while the
scanner is stopped on the CONV object.
Priority
On or Off
Turns Priority Mode on or off for the CONV
object.
Atten
On or Off
When on, applies 20 dB of attenuation to all
transmissions on the CONV channel. Useful in
areas where interference from nearby strong
signals is present.
LED Flash
Solid or
Flash
Controls whether the ALERT LED flashes or
remains on solid when the ALERT LED is used.
LED Color
0-7
Sets LED color to 0-7 as defined in the GLOB
menu. By default, 0=LED Off, 1=Red, 2=Yellow,
3=Green, 4=Cyan, 5=Blue, 6=Magenta, 7=White.
Latch LED
On or Off
Normally the ALERT LED is active only while the
object is receiving a transmission. When Latch is
on, the ALERT LED will remain lit after the
transmission is complete, unless overridden by a
subsequent object that is also using the ALERT
LED.
Backlight
On, Off or
Flash
Controls whether the backlight should be on, off
or flashing while the object is active.
Alarm
None,
Chirp, Hi-
Lo, Alert,
Ring, 2-
Chirp, Fast
Hi-Lo,
DTMF#
Sets the Audible Alarm for the CONV object.
When an Audible Alarm is selected, the selected
alarm will play at the beginning of each
transmission on the CONV object, or anytime the
scanner stops for activity on the CONV object
while scanning.
Fav
On or Off
When On, the CONV object is a member of the
Favorites scan list.
Skywarn
On or Off
When On, the CONV object is a member of the
Skywarn scan list.
Hit Count
Numeric
value
Increments each time a transmission is received
on the CONV object. Press the
Dflt
softkey to
reset to 0.
0715 User Manual
"
Page 72
