SRVC
Parameter
Options
Description
Groups
!"
to
scroll,
SEL
to toggle
on/off
Toggle search groups when Pub Safety, Aircraft
and Amateur service searches are used.
Tag
Alpha-
numeric
text
The alphanumeric display name for the SRVC
search. Use the standard text entry method or
QTXT to name the object.
Modulation
AM, FM,
NFM, AU
Modulation setting for the SRVC search. In most
cases AU will work fine. Use AM to override and
force AM modulation, FM to force FM
modulation, NFM to force narrow FM modulation.
Scan Lists
On or Off
for Scan
Lists 1-20
Sets membership in Scan Lists. Use
!"
keys to
scroll through scan lists. Use
SEL
key to toggle
Scan List membership.
Delay
On or Off
Controls whether a Delay is used to wait for reply
traffic after a transmission on the SRVC search.
Delay Time
1-200
Sets the amount of time (in 100 millisecond
intervals) for the wait for reply delay if Delay is
On, e.g., 20=2 seconds.
L/Out
On or Off
Permanent lockout for the SRVC object. Also
accessed by pressing
FUNC L/OUT
while the
scanner is stopped on the SRVC object.
Zeromatic
On or Off
When on, enhances the scanner
!
s ability to lock
on to the actual center frequency of a search hit
instead of an adjacent frequency.
Atten
On or Off
When on, applies 20 dB of attenuation to all hits
received on the SRVC search. Useful in areas
where interference from nearby strong signals is
present.
Search Dir
#$
Sets search direction used when SRVC object is
active.
LED Flash
Solid or
Flash
Controls whether the ALERT LED flashes or
remains on solid when the ALERT LED is used.
LED Color
0-7
Sets LED color to 0-7 as defined in the GLOB
menu. By default, 0=LED Off, 1=Red, 2=Yellow,
3=Green, 4=Cyan, 5=Blue, 6=Magenta, 7=White.
Latch LED
On or Off
Normally the ALERT LED is active only while the
object is receiving a transmission. When Latch is
on, the ALERT LED will remain lit after the
transmission is complete, unless overridden by a
subsequent object that is also using the ALERT
LED.
0715 User Manual
"
Page 80
