background image

If you wish to remove temporary lockout from a single object, 
navigate to the object using the 5-way pushbutton pad while in 
Manual Mode or PGM mode and press the 

L/OUT

 key again. 

Permanent Lockout

Permanent lockout locks out an object until it is explicitly 
unlocked by you. No traffic will be received on the locked out 
object while permanent lockout is active. 

To apply permanent lockout to an object, press 

FUNC

, then the 

L/

OUT

 key while the scanner is stopped on that object during scan 

operation, or navigate to an object using the 5-way pushbutton 
pad while in Manual Mode or PGM mode and press 

FUNC

, then 

the

 L/OUT

 key. The lowercase “

l

” in the display changes to 

uppercase to indicate that permanent lockout is applied to the 
object:

If you wish to remove permanent lockout from an object, 
navigate to the object using the 5-way pushbutton pad while in 
Manual Mode or PGM mode and press 

FUNC

, then 

L/OUT

 again.

HINT:

You can also toggle lockout anytime you are viewing an object menu 
in Program mode by pressing L/OUT.

Search Lockout

Search lockout works with certain search objects, including 
LMIT searches, some SRVC searches, and SWPR objects. 
Frequency lockout is used to lock out undesired frequencies that 
are found during searches. 

To apply search lockout during a search, press the 

FrL/O

softkey while the scanner is stopped on the undesired frequency:

0715 User Manual

Page 43

Содержание 0715



































































































Отзывы: