Press the
MODE
softkey to change the receive mode (AM, FM,
NFM) from the default for the current frequency range (au).
Press
STOR
to create a new CONV object using the found
frequency.
Use the keypad to enter a new frequency, and press
ENT
to
make that the TUNE frequency.
Using
FUNC TUNE
from any other mode will load the last active
frequency from the other mode into TUNE. For example,
pressing
FUNC TUNE
while parked on a trunked radio system will
load the control channel frequency into the TUNE mode if the
control channel frequency is the last frequency that the scanner
checked while scanning.
Dedicated TUNE mode will always check for the presence of
encoded squelch and digital modulation each time it finds an
active frequency. If a valid encoded squelch code is found, it will
be stored automatically when you press
STOR
to create a new
CONV object.
Using dedicated Limit and Service search modes
The
SRCH
key provides immediate access to the dedicated
search modes of your 0715. Pressing the
SRCH
key cycles
through each search mode in this order: Limit, Railroad, Public
Safety, Aircraft, Ham, CB, Marine, and FRS/GMRS/MURS/DOT.
LMIT Search Mode
Your scanner
!
s dedicated LMIT search mode provides you with
the ability to create a limit search with a search frequency range
between upper and lower limit frequencies that you specify and
perform the limit search directly without creating a new LMIT
object. You can then monitor that frequency range for
transmissions.
To enter LMIT mode, press the
SRCH
key on the keypad
repeatedly until the display indicates LMIT search as follows:
0715 User Manual
"
Page 51
