8
PREPARATIONS
❏
1. Tighten the covering using a covering iron.
ASSEMBLE THE WING
Install the Aileron and Flap Hinges
❏
1. Cut the end off of 4 pivot point hinges to be used on
the 2 outside hinge locations for each aileron.
❏
2. Check the fi t of the pivot point hinges in the fl aps, ailerons
and wing halves. The cut end of the hinges go in the aileron.
❏
3. Add a small drop of oil to the pivot point on each hinge.
The oil will prevent the epoxy from adhering to the pivot point.
Makes sure the oil does not get on the gluing surface of the
hinge. If it does, clean the oil off with a paper towel dampened
with denatured alcohol.
