15
Install the Tail
❏
1. Join the wing halves together with the aluminum
wing tube.
❏
2. Install the wing on the fuselage.
❏
3. Remove the balsa block in the horizontal stabilizer slot.
❏
4. Temporarily install the horizontal stabilizer using the
vertical fi n to align it.
❏
5. The wing and stabilizer should be parallel. If they are
not, lightly sand the stabilizer slot.
❏
6. Glue the stabilizer in the fuselage. Use the vertical fi n
to temporarily position the stabilizer. Wipe off any excess
epoxy with a paper towel and denatured alcohol. Remove
the fi n before the epoxy cures.
❏
7. Glue the vertical fi n in the fuselage.
❏
8. Temporarily install the rudder and the tail gear.
