23
❏
11. Install the battery tray.
❏
12. Check that the throttle is set to reverse if using a
Futaba transmitter. Plug the motor batteries into the ESC.
Check that the motor turns counter-clockwise. If not, switch
two of the three motor wires.
Proceed to
Install the Cowl
.
Gas Engine Installation
❏
1. Drill the fi rewall for your engine.
❏
2. Install the pivot ball on the throttle and choke arm.
❏
3. If installing one of the DLE engines, glue the three 1/8"
(3.2mm) plywood engine standoffs together. Apply a thin
coat of epoxy to fuelproof them. The O.S. GT33 uses the 2"
(50.8mm) aluminum standoffs. (not included)
❏
4. Temporarily mount the engine using the plywood standoff
for the DLE engine or the metal standoff (not included) for
the O.S. engine.
❏
5. Mark the throttle and choke pushrod locations on
the fi rewall.
