GRAVOGRAPH L-SOLUTION 100 Ex Fibre, Руководство пользователя

Страница: 99 / 103

Gravograph Machines - Soft setup
Enabling laser machine in LaserStyle
1. Double-click in Start menu to run the program.
2. Click tab
3. Open Machines: click Config. machines command in Engraving menu.
4. Click Add machine.
5.
Click your machine type.
6. Right-click your laser machine exact name.
7. Click Add machine command in contextmenu.
8. In Installed printer list click L-Solution printer named like your laser machine.
9. Click in Setup output dialog box.
10. Set your laser machine properties in L-Solution Installation dialog box:
a. Click the Bridge that fits your machine.
b. Click ports available on your machine:
USB
COM/LPT
c. Click Laserpower (from 30 Watts, see plate at machine rear side).
d. Click (more information in Gravograph manual delivered with laser machine).
11. Click.
12. In Installed printer list click GT Smartstream port named like your laser machine.
13. Click in Setup output dialog box.
14. Click in Machine Properties dialog box.
Your machine is active in installed printer list.
January 8, 2009
10