L-SOLUTION 100 Ex Fibre machine
. 36
First contact
Engraving direction
(pict. 4)
Determines automatically, according to the selected mode
(blocks in Y or blocks in Y and X), blocks to engrave in the
order and the engraving direction selected by the user.
"Blocks in Y" Mode:
The engraving software determine automatically several
engraving blocks (blocks #1 and #2), in Y, from the
graphics and the text to be engraved on the plate :
The engraving begins in the upper left corner of
the first block (point D1) of the plate. The engraving of
the block is made from left to right and from right to left.
The engraving ends with the last block (#2).
The engraving begins in the upper left corner of
the first block (point D1) of the plate. The engraving of
the block is made only from left to right. The engraving
ends with the last block (#2).
The engraving begins in the lower left corner of
the last block (point S2) of the plate. The engraving of
the block is made from left to right and from right to left.
The engraving ends with the first block (#1).
The engraving begins in the lower left corner of
the last block (point S2) of the plate. The engraving of
the block is made only from left to right. The engraving
ends with the first block (#1).
Engraving
Engraving
Displacement without
engraving
Printer driver
Displacement without
engraving
