GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
Modifications reserved. No liability for printing errors
12/2010
0062196
15
Installing the RC components and the electric motor in the fuselage
The three laser-cut plates must be glued in the fuselage to support the electric motor
and the receiving system components.
Attach the electric motor to the motor bulkhead using the retaining screws supplied
with the motor.
Place the electric motor assembly in the fuselage, working from the canopy opening.
Fit the spinner loosely on the motor shaft, and position the motor in such a way that
the spinner backplate is exactly parallel to the front face of the fuselage. Carefully
withdraw the spinner cap, apply adhesive all round the joint area, and then fit the
spinner cap again. Leave the spinner cap in place while the glue is hardening, so
that the motor cannot shift out of position.
