GRASS VALLEY LDX 864K, Руководство пользователя

Страница: 95 / 122

LDX 86 High Frame Rate/HD/3G/4K Camera Platform User’s Guide (v2.0) 95
Chapter 5 - Camera menu reference
Audio 2 Level -22dB,-28dB,-34dB,
-40dB,-46dB,-52dB,
-58dB,-64dB or

-10 dBu ... +4 dBu
-64dB User 1 — Selects input gain level for Audio channel 2
(when Audio Gain Mode is set to Local).

Note: when Audio Gain Mode is set to
External, Audio 2 Level is set by the XCU.
Audio 2 HPF Off, On Off User 1 — Switches High Pass Filter for Audio channel 2
on or off. Use to reduce 50 Hz and 60 Hz hum
or low frequency noise.
Tally
On Air Lamp Enable, Disable Enable User 0 Oper Select Enable when the On Air Lamp/Tally light
at the front of a large viewfinder should follow
the tally signal or select
Disable if you never
want it to light.
On Air Lamp Lvl 0..99 99 User 0 Oper Sets brightness level of the On Air Lamp/Tally
light at the front of a large viewfinder.
On Air Lamp Handgrip Switch, Input, Off Switch User 0 —
Tally Lock Off, On On User 0 — Switches the Tally Lock function on or off.
When Tally Lock is on, some camera controls
are locked when the camera is On Air.
AWB Settings
AWB Speed 1..40 4 Service — Sets the speed for the Auto White Balance
procedure.
AWB Gain 1..40 10 Service — Sets the gain value for the Auto White Balance
procedure.
IP Settings
IP Mode Auto, Manual Auto User 0 — Sets IP Configuration Mode to Auto or Manual.
IP Address
IP Address 1 1..250 169 User 0 —
Sets camera IP Address
IP Address 2 0..255 254 User 0 —
IP Address 3 0..255 1 User 0 —
IP Address 4 1..254 220 User 0 —
IP Netmask
Subnet Mask 1 0..255 255 User 0 —
Sets IP Subnet Mask
Subnet Mask 2 0..255 255 User 0 —
Subnet Mask 3 0..255 0 User 0 —
Subnet Mask 4 0..255 0 User 0 —
Apply Settings Exec, ... Exec User 0 — Applies new IP settings.
PCI ID 0..8 1 User 0 — Selects ID for external PC operation.
Signals
VF/Main Output Main, VF-HD, VF-
SD, VF-Ext VF-HD User 3 — Selects the output signal on the combined VF/
Main Output connector on the adapter back
panel.
Extern Output Ext1, Ext2, Ext3 Ext1 User 3 Oper Selects the External video signal to route to
the EXT Out connector on the adapter.
TP Output TP, VF TP User 3 Oper Selects the output signal on the TP Out/
Analog Ref In connector on the adapter side
panel.
H-Phase 0..99 50 User 0 — Sets main video signals horizontal phase.
Menu item Values Default Level File Description