GRASS VALLEY LDX 864K, Руководство пользователя

Страница: 93 / 122

LDX 86 High Frame Rate/HD/3G/4K Camera Platform User’s Guide (v2.0) 93
Chapter 5 - Camera menu reference
Reset Exec > Busy Exec User 0 — Select to reset lens aberration data
Status Active,Init, Waiting,
Reading, No Info,
Unsup, I/F NOK,
Off, InitNOK I/F NOK User 0 — Active: CLASS is active;
Init: initilization process is started;
Waiting: camera waits for manual turning of
lens rings;
Reading: camera is reading lens abberation
data from lens;
No Info: lens does not support ;
Unsup: CLASS cannot be activated;
I/F NOK: Lens interface not OK - no lens
connected or analog lens interface in use;
Off: CLASS is switched off.
Progress 0%..100% — User 0 — Shows progress of the lens CLASS data
reading process.
Shading
Shading On, Off On Service Lens Switches lens shading compensation on or off.
R Saw H 0..99 50 Service Lens Sawtooth (Horizontal) for Red channel.
R Par H 0..99 50 Service Lens Parabola (Horizontal) for Red channel.
R Saw V 0..99 50 Service Lens Sawtooth (Vertical) for Red channel.
R Par V 0..99 50 Service Lens Parabola (Vertical) for Red channel.
G Saw H 0..99 50 Service Lens Sawtooth (Horizontal) for Green channel.
G Par H 0..99 50 Service Lens Parabola (Horizontal) for Green channel.
G Saw V 0..99 50 Service Lens Sawtooth (Vertical) for Green channel.
G Par V 0..99 50 Service Lens Parabola (Vertical) for Green channel.
B Saw H 0..99 50 Service Lens Sawtooth (Horizontal) for Blue channel.
B Par H 0..99 50 Service Lens Parabola (Horizontal) for Blue channel.
B Saw V 0..99 50 Service Lens Sawtooth (Vertical) for Blue channel.
B Par V 0..99 50 Service Lens Parabola (Vertical) for Blue channel.
Files
Store Lens File
File Select LCam1, LCam2,
LCam3, LCam4 LCam1 User 1 — Selects a Lens File for storing lens settings.
Store Exec, ... Exec User 1 — Stores the current lens settings in the
selected Lens file.
Recall Lens File
File Select LCam1, LCam2,
LCam3, LCam4 LCam1 User 1 — Selects a Lens File for recall.
Recall Exec, ... Exec User 1 — Recalls the Lens file to the camera. This
overwrites current lens settings.
Intercom
Cam Mic Off, Switch, Track,
Prod Switch User 1 Oper Selects the camera operator’s microphone
routing:
Off = no routing;
Switch = intercom route depends on switch
at the rear of the adapter;
Track = route signal to Tracker channel;
Prod = route signal to Production channel.
Menu item Values Default Level File Description