GRASS VALLEY LDX 864K, Руководство пользователя

Страница: 104 / 122

104 LDX 86 High Frame Rate/HD/3G/4K Camera Platform User’s Guide (v2.0)
Chapter 6 - Maintenance
– The IP address of a camera connected to an XCU can also be found via the C2IP
network in the XCU menu in the
INSTALL > NETWORK > CAM IP
menu.
• Transfer the license file from your local computer to the camera’s root directory.
Adding licenses
1. In the camera menu, navigate to the
LICENSES > NEW LICENSES
menu.
2. Check the time, date and time zone settings in the
TIME
menu. If these settings are
correct, set the
TIME&DATE OK?
item to Yes and continu with step 5.
– Date, time and time zone need to be set correctly before installing a temporary license. A
temporary license uses these settings for its start date reference. Once a temporary license
is activated, it will run until it is expired.
– To confirm the correct setting of time and date, this step must be repeated after each power
cycle.
3. If the time, date or time zone settings are incorrect, set the
TIME&DATE OK?
item to No
and set the correct time in the
CHANGE TIME
menu and/or the correct date in the
CHANGE DATE
menu. After that, set the
TIME&DATE OK?
item to Yes .
4. Enter the
FIND LICENSES
menu and select
SEARCH NEXT
to start searching for licenses
on the USB Flash Drive (or the camera’s root directory when using FTP)
– During the search process [...]
is shown.
5. When a license is found, select
ADD LICENSE
to install it.
– License type, duration and start date (only for temporary licenses) are shown.
– Up to 5 planned licenses are visible at the same time in the menu. More licenses can be
installed; planned licenses show up when they become active.
6. Repeat steps 4 and 5 until all licenses are installed.
7. Finally, check the installed licenses in the
LICENSES > ACTIVE LICENSES
and the
LICENSES > PLANNED LICENSES
menus.
Tip
✎
Websites such as http://time.is/UTC or www.timeanddate.com are a good source to find the
correct date and time in a given time zone.
Trial licenses
Trial licenses can be activated at any time; they will expire after 3 minutes. You do not need a
license file to activate them.
To activate a trial license, navigate to the
LICENSES > TRIAL LICENSES
menu and switch on
the license you want to use.
Tip
✎
Running a trial license is a good way of checking if your camera system is capable of running a
specific functionality.