GRASS VALLEY LDX 864K, Руководство пользователя

Страница: 51 / 122

LDX 86 High Frame Rate/HD/3G/4K Camera Platform User’s Guide (v2.0) 51
Chapter 3 - Operating instructions
3.10 Using intercom
Three intercom channels – production (Prod), program (Prog) and engineering (Eng) – are sent
from the XCU to the camera headset. The headset microphone signal is sent back to the XCU.
Intercom signals are available at the XCU’s intercom connector on the back panel.
To use the intercom system, connect a headset to the XLR5 connector on the back panel of
the camera. An additional Tracker headset can be connected to the auxiliary connector.
Selection buttons and volume controls for the intercom channels can be found on the front and
the back of the camera.
3.10.1 Selecting intercom channels
Push the engineering (Eng) channel selection button to talk to the engineering intercom
channel. Push again to switch off the engineering channel.
☞
Note
☞
Note
Go to the
OPERATOR TOOLBOX > USER BUTTONS
menu and select the
ENG MODE
function to
change the switching mode (momentary or alternating) of the Eng button.
Hold the production (Prod) channel selection button to talk to the production channel. Release
to switch off the production channel.
Production (Prod)
channel volume
Program (Prog)
channel volume
Engineering (Eng)
channel volume
Production (Prod)
channel selection
Engineering (Eng)
channel selection
BACK
Engineering (Eng)
selection button
Production (Prod)
selection button
Main intercom
volume control
FRONT