manualshive.com logo in svg

GRASS VALLEY K2 SOLO -, Руководство по обслуживанию

Поделиться
Скачать
GRASS VALLEY K2 SOLO - Скачать руководство пользователя страница 67

09 April 2010

K2 Solo Media Server Service Manual

67

Using diagnostic tools

Flash Drive. When the K2 Solo Media Server boots, do not proceed with the 
recovery procedure. 

5. Remove the CompactFlash boot media from the K2 Solo Media Server.

If the USB Recovery Flash Drive is in the USB port on the front bezel assembly, 
you can remove the front bezel assembly to access the CompactFlash boot media. 
Doing so does not disrupt the Acronis True Image program.

6. Insert the blank CompactFlash boot media into the K2 Solo Media Server.

7. Restore the image to the blank CompactFlash boot media.

This is now the Recovery CompactFlash boot media for that particular K2 Solo 
Media Server.

8. Remove the Recovery CompactFlash boot media from the K2 Solo Media Server.

9. Insert the original CompactFlash boot media into the K2 Solo Media Server.

10. Click 

Operations | Exit

 to exit the Acronis True Image program.

The K2 Solo Media Server restarts automatically.

11. Remove the USB Recovery Flash Drive while the K2 Solo Media Server is 

shutting down.

12. Store the Recovery CompactFlash boot media in a place where it can be retrieved 

quickly and easily identified with the K2 Solo Media Server it restores.

13. If a system fault occurs and you need to restore the K2 Solo Media Server, you can 

do so using the Recovery CompactFlash boot media as follows:

a. Shutdown the K2 Solo Media Server.

b. Exchange the current CompactFlash boot media with the K2 Solo Media 

Server’s Recovery CompactFlash boot media.

NOTE: On an individual K2 Solo Media Server use only the Recovery 
CompactFlash boot media prepared for that specific K2 Solo Media Server. Do not 
attempt to use the Recovery CompactFlash boot media from a different K2 Solo 
Media Server.

c. Start up the K2 Solo Media Server.

The K2 Solo Media Server boots from the Recovery CompactFlash boot media 
with the system intact as it existed when you created the Recovery CompactFlash 
boot media.

Using diagnostic tools

Use the following sections as necessary to identify problems.

Running Check Disk

If your K2 Summit Production Client has a critical system fault, you should run Check 
Disk to identify and remove any corrupted files.

Содержание K2 SOLO -











































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды