GRASS VALLEY K2 SOLO -, Руководство по обслуживанию

Страница: 55 / 106

09 April 2010 K2 Solo Media Server Service Manual 55
Set Rx/Tx Descriptors Value
this procedure.
6. Select the name in the Name column.
7. Select
File | Rename
to enter rename mode.
8. Type the name required for the location.
9. If continuing with network configuration, proceed with the next procedure “Set Rx/
Tx Descriptors Value” . If network configuration is complete, enable the write
filter.
Set Rx/Tx Descriptors Value
1. If you have not already done so, disable the write filter.
2. In Device Manager, highlight and right-click the
Intel® PRO/1000 PT Dual Port
Server Adapter
.
3. Select
Properties
. The Properties dialog box opens.
4. Click
Advanced
tab.
5. In the Settings list, select
Performance Options
, then click the
Properties
button.
The Performance Options dialog box opens.
6. In the Property list, select
Receive Descriptors
.
7. In the Values field, if not already set correctly, use the up/down arrows to set the
value to
1024
. If 1024 is not available, select a different entry in the settings list,
then select back to Receive Descriptors. This resets the values available in the
Values field.
8. In the Settings list, select
Transmit Descriptors
.
9. In the Values field, set the value to
1024
.
10.Click
OK
to close dialog boxes and save settings.
11. Repeat this procedure on the remaining Ethernet adapters.
12.If continuing with network configuration, proceed with the next procedure “Create
the Control Team” . If network configuration is complete, enable the write filter.
Create the Control Team
NOTE: Team control ports only. Do not team media ports.
1. If you have not already done so, disable the write filter.
2. In Device Manager, right-click the adapter name that on this K2 Solo Media Server
is assigned to location PCI bus 4, device 0, function 1.
3. Select
Properties
The Properties dialog box opens.
4. Select the
Teaming
tab.