GRASS VALLEY K2 SOLO -, Руководство по обслуживанию

Страница: 58 / 106

58 K2 Solo Media Server Service Manual 09 April 2010
Chapter 3 Service Procedures
b. Select the
Settings
tab.
c. Click
Modify Team
. A dialog box opens.
11. On the
Adapters
tab, do the following:
a. Select the top entry, which is the adapter name that maps to Control Connection
#1 (PCI bus 4, device 0, function 1) and click
Set Primary
.
b. Select the adapter name that maps to Control Connection #2 (PCI bus 3, device
0, function 1) and click
Set Secondary
.
12. Click
OK
and
OK
and to close dialog boxes.
13. Restart the K2 Solo Media Server.
14. If continuing with network configuration, proceed with the next procedure “Name
team and loopback” . If network configuration is complete, enable the write filter.
Name team and loopback
1. If you have not already done so, disable the write filter.
2. On the Windows desktop right-click
My Network Places
and select
Properties
. The
Network Connections window opens.
3. For the Control Team and the loopback, select adapter names in the “Device
Name” column and rename them as follows:
a. Select the adapter name.
b. Select
File | Rename
to enter rename mode.
c. Type the name, as specified in the following table: