Graseby 3000/500, Руководство пользователя

Страница: 92 / 231

5 — 1 3
G r a s e b y M e d i c a l L t d .
5
3 0 0 0 / 3 1 0 0 a n d 5 0 0 / 5 0 5 S e r v i c e M a n u a l I s s u e A ( A p r i l 2 0 0 2 )
V o l u m e t r i c I n f u s i o n P u m p s
Attaching more than one pump to an IV pole
(Revised case design shown here)
When multiple infusion lines are required, you can connect up to
three pumps to a single pole using the hooks and rails that make up
the modular connection system.
As all pumps have connectors on both sides, you can use any one as
the centre, left, or right pump.
This diagram shows how three pumps may be connected together
using the Volumetric’s modular connection system:
Inspecting the modular connections
Before connecting the pumps, you must check that the modular
connection parts are all in good condition:
1. Carefully inspect the modular connection system for damage,
including cracks, chips, loose or bent parts.
2. Press the disconnect buttons several times to make certain that
the buttons move in and out freely.
WARNING: Do not use the pump if you detect any cracks, chips and loose or
bent parts, or if the buttons do not move in and out freely when
they are pressed. Failure to do so could cause inadvertent
disconnection of the pumps.