Graseby 3000/500, Руководство пользователя

Страница: 124 / 231

G r a s e b y M e d i c a l L t d .
7 — 2 8
I s s u e A ( A p r i l 2 0 0 2 )
3 0 0 0 / 3 1 0 0 a n d 5 0 0 / 5 0 5 S e r v i c e M a n u a l
V o l u m e t r i c I n f u s i o n P u m p s
7
Press the Options key once.
"Search occlusion Pressure" screen must be showing.
Set to 123 using the arrow keys.
Press the Options key once.
"Search Halfstep Limit" screen must be showing.
Press the UP arrow once to set to 920.
Press the Options key once.
Press the arrow keys as needed until "Back Off Method: Rev to
Pr + Steps" shows.
Press the Options key once.
"Back Off Pressure" screen must be showing.
Press the UP arrow once to set to 20.
Press the Options key once. The screen must read
"Rev to Pos range".
Press the UP arrow once to change the first four digits to 1340.
Press the * key once.
Press the UP arrow once to change the first four digits to 1500.
Press the Options key once
Enter a new time and date if necessary (set time to GMT) using
the numeric key pad.
Press Options key again until you come to the PUMP ID (serial
number) screen. Enter the serial number as follows:
Press the * key then use the numeric keypad to enter the pump
serial number (all 9 digits).
After the serial number is input, the "Clear Pump History" screen
will appear.
Press the * key twice to clear the pump history.
Switch off the pump.
Pump initialisation is now complete.
CPU board initialisation for Version 0.63 software
continued