Graseby 3000/500, Руководство пользователя

Страница: 65 / 231

G r a s e b y M e d i c a l L t d .
4 — 1 8
4
I s s u e A ( A p r i l 2 0 0 2 ) 3 0 0 0 / 3 1 0 0 a n d 5 0 0 / 5 0 5 S e r v i c e M a n u a l
V o l u m e t r i c I n f u s i o n P u m p s
Chart E - Keypad State Input Mode
Use this chart to determine the keypad state input mode. Do not
convert to binary. Take the value from field EEE on Snapshot screen-b.
Value Mode
0 Keypad default mode.
1 Occlusion Alarm Setting.
2 Options.
3 Quick Rate Change.
4 Total Volume.
5 Taper End Early.
6 Taper setup.
7 Keypad Locked.
8 Rate input.
9 Volume to be Infused input.
10 Taper Run.
11 Volume Over Time setup.
12 Dose-Rate Calculation setup.
13 Dose Run.
14 Dose-Rate rate titrate.
15 Dose-Rate dose titrate.
The example snapshot screen-b shows field EEE with a value of
decimal 008, so the keypad state input mode is ‘Rate input’.
Chart D Pump sensor flags and occlusion alarm setting
Once you have converted the decimal value into binary format, use
this chart to determine the pump’s sensor flags and status of the
pump’s occlusion alarm setting. In the example Snapshot screen-b,
field DDD shows a value of 139 decimal. This converts to 10001011 in
binary format.
Bit 7 Bit 6 Bit 5 and Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
0 = Micro Not Occlusion alarm status Auxilliary CTS not Keypad Pump on
jumper Used - see Chart DD below power off active not locked AC
1 = No Micro Auxilliary CTS Keypad Pump
jumper power off active locked on battery
Chart DD - Occlusion alarm status
Use this table to determine the occlusion alarm status from bits
5 and 4 of the binary representation of field DDD.
Bit 5 Bit 4 Occlusion alarm setting
0 0 Undefined
0 1 Low
1 0 Medium
1 1 Hig h