Graseby 3000/500, Руководство пользователя

Страница: 68 / 231

4 — 2 1
G r a s e b y M e d i c a l L t d .
4
3 0 0 0 / 3 1 0 0 a n d 5 0 0 / 5 0 5 S e r v i c e M a n u a l I s s u e A ( A p r i l 2 0 0 2 )
V o l u m e t r i c I n f u s i o n P u m p s
Chart G - State Code 93
If the system state code (ZZ) on Snapshot screen-a is 93, then GGG on
snapshot screen-b contains a decimal representation of a hexadecimal
value. This hex value encodes the amount mode and dosing mode
selected by the operator during a Dose-Rate Calculation program
setup.
If the system state code is 93 use the instrucitons in this section to
convert the value to hexadecimal and then interpret the result using
the table below.
To convert the GGG value:
1. Take the decimal number, and divide it by 16.
2. The initial quotient is ‘digit 1’ and the remainder is ‘digit 0’.
As an example, if the value of GGG was 052:
052 / 16 = 3 (digit 1), with a remainder of 4 (digit 0).
To interpret the result
Look up the resulting values for digit 1 and digit 0 in the table below
to find out the dosing mode and amount mode:
Digit 1 - Amount mode Digit 0 - Dosing mode
0 MG/bag 0 mcg/kg/min
1 Gm/bag 1 mcg/min
2 mcg/bag 2 MG/min
3 units/bag 3 MG/hr
4 units/hr
5 MG/kg/hr
6 mch/kg/hr
7 MG/kg/min
8 units/kg/hr
In the example above:
Digit 1 with a value of 3 indicates an Amount mode of units/bag
Digit 2 with a value of 4 indicates a Dosing mode of units/hr.