GRAPHTEC FC2250 Series, Руководство пользователя

Страница: 92 / 130

5-16
Chapter 5 FUNCTION SETTINGS AND OPERATIONS
5.15 Setting the Cutting/Plotting Area
The U.R. (Upper Rght) and L.L. (Lower Left) functons are used to specfy the effectve cuttng area of the
plotter so that any data specfyng coordnate postons outsde of the effectve cuttng area s dsregarded.
The orgn moves together wth the new cuttng area.
Current origin/Current L.L. Point
New effective cutting area's origin
New effective cutting area's L.L. Point
New effective cutting area's
U.R. Point
Y
X
Current U.R. Point
Current effective cutting area
Newly specified effective
cutting area
As soon as both the L.L. and U.R. points are set, the pen carriage moves to the new origin. To avoid injury, keep your
hands and other obstacles out of the vicinity of the pen carriage and Y bar.
(1) Press the [PAUSE] key to select PAUSE mode.
(2) Press the [NEXT] key repeatedly untl the followng menu s dsplayed.
FORCE OFFSET
SPEED QUALITY
I/F FUNCTION
TOOL COND AREA OPT
(3) Press the [F4] key (AREA OPT) to dsplay the menu shown below.
FORCE OFFSET
SPEED QUALITY
ROTATE MIRROR
L.L. U.R. SCALE
(4) Press the [F2] key (L.L. U.R.) to dsplay the screen for settng the L.L. pont of the effectve cuttng area.
FORCE OFFSET
SPEED QUALITY
SET L.L. DEFAULT
X= 0 Y= 0
Use the [ ] [ ] [ ] [ ] keys to move the pen carrage (the tp of the tool selected by the current settng) to
the desred new L.L. pont (orgn) and then press the [ENTER] key . At such tme, the X= and Y= coordnate values
respectvely represent the current pen carrage poston as X- and Y-axs dsplacements from the orgnal orgn.
To select the default L.L. pont, press the [F3] key (DEFAULT). You do not need to press the [ENTER] key f the
default L.L. pont was selected.
(5) When the effective cutting area's L.L. point has been specified, the screen for setting the U.R. point is displayed.
FORCE OFFSET
SPEED QUALITY
SET U.R. DEFAULT
X= 0 Y= 0