GRAPHTEC FC2250 Series, Руководство пользователя

Страница: 60 / 130

4-9
Chapter 4 REGISTRATION MARK SETTINGS AND DETECTION
4.5 Setting the Registration Mark Size
This function allows you to specify the size of the registration marks drawn on the medium.
(1) Press the [PAUSE] key to select PAUSE mode.
(2) Press the [NEXT] key repeatedly untl the followng menu s dsplayed.
FORCE OFFSET
SPEED QUALITY
MARK TOOL U/D
BUFFER CLR. VIEW
(3) Press the [F1] key (MARK) to dsplay the regstraton mark functons selecton menu.
FORCE OFFSET
SPEED QUALITY
MODE DIST ADJ
TYPE OTHER SETUPS
(4) Press the [F4] key (OTHER SETUPS) to dsplay the menu shown below.
FORCE OFFSET
SPEED QUALITY
SIZE ADJ. SENS
ORG OFT SENS OPT
(5) Press the [F1] key (SIZE) to display the menu for setting the registration mark size.
FORCE OFFSET
SPEED QUALITY
MARK SIZE
15 mm
Use the [ ] or [ ] key to change the numerc value, and then press the [ENTER] key to confirm your selection.
Setting range: 5 to 20 (mm)
Registration mark pattern 1,
Mirror 1
Registration mark pattern 3 Registration mark pattern 2,
Mirror 2
Set value
Set value
Set value
Set value
Set value
Set value
(6) Press the [PAUSE] key to cancel PAUSE mode.