GRAPHTEC FC2250 Series, Руководство пользователя

Страница: 87 / 130

5-11
Chapter 5 FUNCTION SETTINGS AND OPERATIONS
5.10 Assigning Perforation Cutting
Ths functon allows you to assgn the perforaton cuttng operaton to COND Nos. 1 to 8.
(1) Press the [PAUSE] key to select PAUSE mode.
(2) Press the [NEXT] key repeatedly untl the followng menu s dsplayed.
FORCE OFFSET
SPEED QUALITY
I/F FUNCTION
TOOL COND AREA OPT
(3) Press the [F3] key (TOOL COND) to dsplay the menu shown below.
FORCE OFFSET
SPEED QUALITY
THICK CUT LINE
TOOL No. ADJ.T POS
(4) Press the [F3] key (CUT LINE) to dsplay the perforaton cuttng operaton assgnment settng screen.
FORCE OFFSET
SPEED QUALITY
COND. No. 12345678
CUT LINE
Blinking cursor
The upper row of the dsplay represents the cuttng condton COND Nos. A check mark [ ] s dsplayed for any of
the COND. Nos. to whch the perforaton cuttng operaton has been assgned.
Use the [ ] or [ ] key to move the blnkng cursor to the COND. No. that you want to assgn the perforaton
cuttng operaton to, and the [ ] or [ ] key to dsplay or hde the check mark [ ].
Press the [ENTER] key to confirm your selections.
(5) Press the [PAUSE] key to cancel PAUSE mode.
•
These settings are retained in the plotter's internal memory even while the plotter is turned off.
•
Please see Section 3.8, "Setting the Cutting Conditions" for details on perforation settings.