u
IMPORTANT!
Always turn
OFF
printer before cleaning or performing other maintenance.
The DuraLabel 2000 requires no lubrication and only minimal maintenance.
Basic cleaning of the exterior, the
print head
and the
platen roller
will prolong
the life of the
printer
and aid in producing crisp, clear labels with every print. An
instructional cleaning video on proper cleaning and maintenance of the
printer
can be viewed online:
http://duralabel.com/duralabel-2000/dl2000-support.php
CLEANING EXTERIOR SURFACES
Use a damp cloth moistened with water and mild detergent solution, or use
commercial cleaner designed for electronic equipment, and wipe off any dust,
dirt or other visible markings.
CLEANING THE PRINT HEAD
1.
Turn off the
printer
.
2.
Open the
printer cover
by pulling down on the
cover release lever.
3.
Remove the
supply spindle
and
ribbon cartridge
to expose the
print head
. Do
not touch the
print head
with fingers or other objects.
4a.
Using a cleaning pen, lightly place the tip of the pen onto the
print head,
and
rub back and forth several times to pull up any ribbon and ink particles. Repeat
this process if necessary.
4b.
Using a cleaning card, insert one end of the card between the
platen roller
and the
black strip
of the
guideplate
, pushing it through the slot at the top of the
printer cover.
Place the other end of the card over the
slotted round bar
and down
into the compartment space so that the card lies between the
slotted round bar
and the
print head
. Close the printer cover, turn the
printer
on, and press
FEED
.
4c.
If no cleaning pen is available, the
print head
may be cleaned using a cotton
swab wetted with isopropyl alcohol in the same manner as described in step
4a
.
5.
Allow the alcohol to dry, then replace the
ribbon cartridge
and the loaded
supply spindle
. Repeat as needed, or after every four or five rolls of supply.
-41-
8. CLEANING & MAINTENANCE
Содержание DuraLabel 2000
Страница 55: ...NOTES 52...
