7
Step 3:
Click on the “MAC”, and the “IP Address”, “Net Mask” and “Gateway” will be displayed
below.
NOTE:
The IP Address, Net Mask and Gateway must be corresponding with your network settings
for you to access the camera. You can follow the steps below to get your network information.
-
Click “Start”
→
“All Programs”
→
“Accessories”
→
“Command Prompt”. A MS-DOS
window will appear. Type “ipconfig” and them press “Enter” to get your network
information.
-
Assign IP Address, Netmask (Subnet Mask) and Gateway (Default Gateway) for the Grand
Wi-Fi/ IP Camera Plus. (You must use the same Net Mask (ex. 255.255.255.0) and Gateway
(192.168.2.254). You can use any IP address between 192.168.2.1-254, but make sure that
the IP Address has never been used or is used by another IP addressable device.)
Step 4:
Directly modify the “IP Address”, “Net Mask” and “Gateway”, and click “Setting” to save.
8
Step 5:
Click the “Find IP Cam” button again, and the new network information will be listed.
Step 6:
Select the “MAC” and click the “Show IP Cam” button to connect the Grand Wi-Fi/ IP
Camera Plus.
Step 7:
When the login screen appears, enter the user name and password (default user name: root,
default password: admin), and click the “OK” button to login your camera.
