Gradall XL3100IV, Руководство по безопасности оператора, Страница: 39 / 172

Section 2 - Pre-Operation and Controls
2-15 80804002
Resetting Prognostics
Oil Life Monitor
Press and hold Mode button (1) for approximately 10 seconds while in Oil Life
Monitor mode.
-Or-
Perform the following shift sequence
with the ignition on but the engine off . Do
not stop the sequence for more than three seconds once you have started:
N-D-N-D-N-R-N .
Note: A “99” will display verifying that Oil Life Monitor has been reset.
Filter Life Monitor
Press and hold Mode button (1) for approximately 10 seconds while in Filter Life
Monitor mode.
-Or-
Perform the following shift sequence
with the ignition on but the engine off . Do
not stop the sequence for more than three seconds once you have started:
N-R-N-R-N-D-N .
Note: The wrench icon will illuminate briefly and “oK” will display verifying Filter Life
Monitor has been reset.
Transmission Health Monitor
The wrench icon clears automatically when appropriate conditions are detected.
Transmission Health Monitor must be reset manually using Allison DOC™ after
correcting a clutch system issue.
OAC1770
1
MODE
R
N
OAC1780
1
MODE
R
N