Graco SD HP Series, Инструкция по эксплуатации

Страница: 7 / 52

Typical Installation
313431K 7
Typical Installation
Overhead-Mounted Hose Reel
Key:
A Main air supply line
B Pump air supply line
C Air filter
D Air regulator
E Bleed-type master air valve (required)
F Pump
G Pump grounding wire (required)
H Fluid drain valve (required)
J Fluid shutoff valve
K Fluid line
L Hose reel fluid inlet kit
M Hose reel
N Dispensing valve
P Mounting channel/base
A ground wire (G), bleed-type master air valve (E) and
fluid drain valve (H) are required in your system installa-
tion. These components help reduce the risk of serious
injury, including electric shock and splashing in your eyes
or on the skin.
•
The ground wire must be connected to the pump
grounding lug and to a true each ground according to
your local code.
• The bleed-type master air valve relieves air trapped
between this valve and the pump after the air is shut
off. Trapped air can cause the pump to cycle unexpect-
edly Locate the valve close to the pump.
• The fluid drain valve assists in relieving fluid pressure
in the displacement pump, hose and gun. Triggering
the valve to relieve pressure may not be sufficient.
F
IG
. 1: Typical Installation
0 3 7 9 1
A
B
C
D
E
F
G
K
H
J
N
M
P
L
J