Graco LineLazer ES 1000, Установка, Ремонт, Запчасти

Страница: 14 / 120

Grounding Procedure (AC Wall Power)
14 3A4603F Operation, Repair, Parts
Grounding Procedure
(AC Wall Power)
Position the striper so the wheels are on a true
grounded surface. Not on pavement.
The plug must be plugged into an outlet that is properly
installed and grounded in accordance with all local
codes and ordinances.
Do not modify the plug provided; if it does not fit the
outlet, have the proper outlet installed by a qualified
electrician.
Power Requirements
• 100-120V units require 100-120 VAC, 50/60 Hz, 12
or 15A, 1 phase.
• 230V units require 230 VAC, 50/60 Hz, 7 or 9A, 1
phase.
Extension Cords
Use an extension cord with an undamaged ground
contact. If an extension cord is necessary, use a 3-wire,
12 AWG (2.5 mm
2 ) minimum.
Pails
Solvent and oil-based fluids: follow local code. Use
only conductive metal pails, placed on a grounded
surface such as concrete.
Do not place pail on a non-conductive surface such as
paper or cardboard which interrupts grounding
continuity.
Always ground a metal pail: connect a ground wire to
the pail. Clamp one end to the pail and the other end to
a true earth ground such as a water pipe.
To maintain ground continuity when sprayer is
flushed or pressure is relieved:
hold metal part of
spray gun firmly to the side of a grounded metal pail
then trigger gun.
This equipment must be grounded to reduce the risk
of static sparking and electric shock. An electric shock
or static spark can cause fumes to ignite or explode.
An improper ground can cause electric shock. A good
ground provides an escape wire for the electric
current.
ti24584a
ti24585a