Graco HydroShield WABL00, Инструкция - Каталог запасных частей

Страница: 53 / 140

Setup Menus
Purge Purge Purge Screens Screens Screens 1–5 1–5 1–5
Use the Purge screens to configure up to 5 purge
profiles. Customize each purge profile to best suit
different fluids. Purge: Purge: Purge: Assign a number to the purge profile.
The purge profile number can be used:
• In the Home screen when in Purge mode. See
Home Screen, page 45 .
• In the Presets screen to associate a purge profile
with a paint color. See Presets, page 52 .
Timeout: Timeout: Timeout: The number of seconds that the system
waits for action before it indicates that there is a
problem completing the purge profile. The timeout
should be set long enough to complete the refill
cycles. Enter 0 to disable the timeout.
Fluid: Fluid:
Fluid: Set the fluid pressure for the fluid to exit the
system during this purge profile.
The remaining settings define the actions in the purge sequence:
1 Dump Dump Dump
Enable:
Enable: Enable:
Check this box if the dump valve is connected to a hose that empties into a waste
container. If the dump valve is not connected to a hose, be sure to clear this box, or the
remaining contents from the pump will spill out of the system.
2 Air Air
Air Push:
Push:
Push:
After the pump is empty, the number of seconds that air pushes through the system.
Enter 0 to skip the air push.
3 Flush Flush Flush Push: Push: Push: The number of seconds that flush fluid pushes through the system. Enter 0 to skip
the flush push.
4 Refill Refill Refill Cycles: Cycles: Cycles: The number of times to empty and refill the pump. Enter 0 to skip the refill cycles.
5
Flush Flush
Flush Dump:
Dump:
Dump:
Enter the number of seconds to open both the flush material valve and the dump valve.
This cleans the dump valve line.
6 Chop: Chop: Chop: Check this box to add a flush period of alternating fluid and air to the purge sequence.
• Air Air Air Chop: Chop: Chop: The number of seconds for the air interval.
• Flush Flush Flush Chop: Chop: Chop: The number of seconds for the fluid interval.
• Total Total
Total Chop:
Chop:
Chop: The total number of seconds that the air and fluid will alternate through
the system.
7 Final Final Final Push: Push: Push: Select the last action of the purge sequence:
• None: None: None: Perform no final action. The purge is complete after the Refill Cycles or the
Chop has completed.
• Air: Air:
Air: Push air through the system for a number of seconds.
• Flush: Flush:
Flush: Push flush fluid the system for a number of seconds.
3A8493A 53