Graco HTX 2030, Руководство по эксплуатации

Страница: 10 / 28

Grounding
10 313888E
Grounding
Ground sprayer with grounding clamp to earth ground
when flushing sprayer.
To maintain grounding continuity when flushing or
relieving pressure: Hold metal part of the spray gun
firmly to the side of a grounded metal pail, then trigger
the gun/valve.
Pressure Relief Procedure
Applicator and Air Spray Trigger Gun
(Base Coat Pump)
Follow the Pressure Relief Procedure whenever
you see this symbol.
1. Turn engine OFF.
2. Turn on/off switch OFF and turn pressure control
knob fully counterclockwise.
3. HTX2030 Air Spray Trigger Gun only: Pull gun
trigger to release pressure.
4. Turn prime/drain valve down to DRAIN position.
Fluid from drain valve can splash in eyes or skin and
cause serious injury. Keep hands clear of pressure
relief valve and always wear safety glasses.
NOTE: If you suspect spray tip nozzle or hose is com-
pletely clogged or that pressure has not been fully
relieved after following the previous steps, cover the
connection at end of hose with a heavy rag and
very
slowly loosen connection.
The equipment must be grounded to reduce the risk of
static sparking. Static sparking can cause fumes to
ignite or explode. Grounding provides an escape wire
for the electric current.
ti3058a
This equipment stays pressurized until pressure is
manually relieved. To help prevent serious injury from
pressurized fluid, such as skin injection, splashing
fluid and moving parts, follow the
Pressure Relief
Procedure when you stop spraying and before clean-
ing, checking, or servicing the equipment.
ti6208b
ti13050a
ti14632a