Graco HTX 2030, Руководство по эксплуатации

Страница: 22 / 28

Digital Tracking System (DTS)
22 313888E
Secondary Menu - Stored Data
Mode
• Open drain valve
• Turn pump control counterclockwise to lowest set-
ting
• Set applicator switch to OFF
1. Start Engine, page 12. Pressure display appears.
2. Press and hold DTS button and turn applicator
switch ON.
3. SERIAL NUM scrolls through display and a 3 to
5-digit serial number displays.
4. Short press DTS button and date code displays.
5. Short press DTS button and part number displays.
6. Short press DTS button and Base Coat hours dis-
plays.
Short press DTS button and Top Coat hours dis-
play.
Short press DTS button and Engine hours display.
7. Short press DTS button and LAST ERROR scrolls
through display followed by stored error message
and error code. This information cycles repeatedly
until cleared.
See page 23 for error code explanations.
8. Press and hold DTS button until CLEAR ERROR
NO ERROR CODE scrolls through the display and
error code E=00 displays.
9. Short press DTS button again and SOFTWARE
REV scrolls through display followed by revision
level (for example 10102).
10. Short press to return to step 3. Turn on/off switch
OFF at any time to exit stored data mode.
ti5812a
ti13764a
ti6213a
ti6215a
ti13786a
ti13787a
ti6220a
ti6218a
ti13788a
ti5822a