Graco E-Flo iQ, Руководство по эксплуатации

Страница: 58 / 102

Troubleshooting
58 333587B
DD3_
DD4_ Pump Alarm or
Deviation
(user
selectable) Pump Diving P_ Pump diving
detected Flow to pump inlet
restricted Check inlet valve is open or check inlet
supply system for clogs.
DKC_ Pump Alarm Crossover Error
P_ Crossover error
in tandem
system Second pump is in
error state when
crossover takes
place Clear the error on the second pump.
EUD_ Driver Advisory Auto
Depressurization
Occurred The pump has
auto
depressurized The pump was auto
depressurized due
to the fact that the
pump did not move
for the auto
depressurize timer Remember to primary/purge system before
running production.
EUH_ AMZ Record
Only Heat Idle
Timeout Automatically
turns off heat
after the pump
has not moved
for the
designated
amount of time All zones on heat
module were
successfully turned
off No action necessary.
EAUX ADM Advisory Download to
USB In Process Information is
currently being
downloaded to
USB Download to USB
initiated No action necessary. Self-clearing.
EAW_ AMZ Record
Only Heat_ Module
Warming Up All zones on
heat module
are in warming
up state All zones on heat
module were
successfully placed
into warm up No action necessary.
EBUX ADM Advisory Download to
USB Complete Download to
USB is
complete All requested
information has
finished
downloading to
USB No action necessary. Self-clearing.
EBH_ AMZ Record
Only Heat_ Module Off All zones on
heat module
are turn off All zones on heat
module were
successfully turned
off No action necessary.
EC0X ADM Record
Only Setup Values
Changed A setting in the
setup screen
was changed A setting in the
setup screens was
changed No action necessary if changes were
desired.
EDF_ AMZ Record
Only Heat_ Module
Placed into Heat
Soak All zones on
heat module
are in heat soak
state All zones on heat
module were
successfully placed
into heat soak No action necessary.
EDS_ AMZ Record
Only Heat_ Module
Placed into
Setback All zone on
heat module
are in setback
state All zones on heat
module were
successfully placed
into setback No action necessary.
EDT_ AMZ Record
Only Heat_ Module is
at desired
temperature All zone on
heat module
are at desired
temperature All zones on heat
module have
successfully
reached the desired
temperature No action necessary if the desired
temperature was reached.
Error Location Type Error Name
Error
Description Cause
Solution