Graco 24L097 Скачать руководство пользователя страница 24 | Manualshive

Страница: 24 / 90

Graco 24L097 Скачать руководство пользователя страница 24

Air

Air

Air Connections

Connections

Connections

Connect incoming air supply to the air supply shut-off
valve (L) 1/4 npt (f). (See

Components, page 17

NOTICE

NOTICE

NOTICE

To avoid damage to the I/P transducer, use clean,
dry, oil-free air, filtered through at least a 40 micron
filter.

See

Technical Specifications, page 88

, for air

pressure and consumption ratings. The I/P
transducer exhausts a small amount of air whenever
air is connected, regardless of whether the system is
operating. Refer to your applicator gun air pressure
and consumption ratings and size your air supply
accordingly.

The ProControl 1KE Plus uses an Air Flow Switch
(AFS) to detect when the applicator gun is triggered.
Do not bypass the AFS. See

Accessories, page 77

for an alternate gun trigger air pressure switch that
can be used in place of the provided AFS.

NOTE:

NOTE:

NOTE:

• The side port (AH) on the fluid regulator

can be used for high-speed flushing with an
independent air source. Set the air pressure
higher

higher

higher than the top port (AD) air pressure. See

Setup Screen 11: Fill Mode, page 51

, and

Setup Screen 12: Flush Mode, page 52

, for

the preferred method of controlling fill and flush
pressure.

• Flushing air pressure must be removed from the

side port (AH) to return to the previous flow setting.

24

3A6948A

«
...
22
23
24
25
26
...
»

Содержание 24L097



























































































Отзывы:

Нет отзывов