Device Description HG G-19370ZA | English, Revision 01 | Date: 17.05.2017 | www.goetting-agv.com
19
Chapter 7: Configuration
Start the terminal program on the PC. The COM port has to be set to the port configured by
the virtual port driver. When the connection is established successfully press any key to
make the main menu shown in 7.4 below appear in the terminal program.
7.4 Service Program
Figure 8
Main menu
•
Frequency config, s. section 7.4.1 on page 20
•
CAN config, s. section 7.4.2 on page 20
•
Calibration config, s. section 7.4.3 on page 21
•
Encoder config, s. section 7.4.4 on page 22
•
Serial Data-Stream, s. section 7.4.5 on page 22
•
Firmware Info, output of the firmware version currently running in the sensor
•
Firmware Update, s. section 7.4.5 on page 22
•
Reboot, triggers a re-start of the inductive guidance sensor
HG19370 Main menu Goetting KG
1: Frequency config
2: CAN config
3: Calibration config
4: Encoder config
5: Serial Data-Stream
I: Firmware Info
U: Firmware Update
R: Reboot
Press any other key to quit
