Edited in Germany • Subject to change without notice • A pdf version is available on the Internet
GMC-I Messtechnik GmbH
Südwestpark 15
90449 Nürnberg •
Germany
Phone +49 911 8602-111
Fax
+49 911 8602-777
E-Mail [email protected]
www.gossenmetrawatt.com
9
Order Information
*
115 V variant available with appendix -S001
Mounting
10 Repair and Replacement Parts Service,
Calibration Center* and Rental Service
If required please contact:
GMC-I Service GmbH
Service Center
Beuthener Straße 41
90471 Nürnberg • Germany
Phone +49
911
817718-0
Fax +49
911
817718-253
www.gmci-service.com
This address is only valid in Germany. Please contact our
representatives or subsidiaries for service in other countries.
* DAkkS Calibration Laboratory for Electrical Quantities
D-K-15080-01-01 accredited per DIN EN ISO/IEC 17025
Accredited quantities: direct voltage, direct current value, direct current resistance,
alternating voltage, alternating current value, alternating current active power,
alternating current apparent power, DC power, capacitance, frequency and
temperature
Competent Partner
GMC-I Messtechnik GmbH is certified in accordance with
DIN EN ISO 9001:2008.
Our DAkkS calibration laboratory is accredited by the Deutsche
Akkreditierungsstelle GmbH (National accreditation body for the
Federal Republic of Germany) in accordance with DIN EN ISO/IEC
17025 under registration number D-K-15080-01-01.
We offer a complete range of expertise in the field of metrology:
from
test reports
and
factory calibration certificates
, right on up to
DAkkS calibration certificates
.
Our spectrum of offerings is rounded out with free test equipment
management.
Our service department includes an
on-site DAkkS calibration bench
.
If errors are discovered during calibration, our specialized
personnel are capable of completing repairs using original
replacement parts.
As a full service calibration lab, we can calibrate instruments from
other manufacturers as well.
11 Product Support
If required please contact:
GMC-I Messtechnik GmbH
Product Support Hotline
Phone +49
911
8602-0
Fax +49
911
8602-709
Description (abbreviated name) Type
Article No.
SSP-KONSTANTER 120-20
32 N 20 RU 10 P
K320A*
SSP-KONSTANTER 120-40
32 N 40 RU 6 P
K321A*
SSP-KONSTANTER 120-80
32 N 80 RU 3 P
K322A*
SSP-KONSTANTER 240-20
32 N 20 RU 20 P
K330A*
SSP-KONSTANTER 240-40
32 N 40 RU 12 P
K331A*
SSP-KONSTANTER 240-80
32 N 80 RU 6 P
K332A*
SSP-KONSTANTER 320-32
32 N 32 RU 18 P
K334A*
IEEE 488 interface
for SSP KONSTANTER types 32 N ...
Weight: 172 g,
Dimensions: 150 x 100 x 60 (L x W x H)
K380A
Description
Note
Article No.
19" rack adapter, 1 x 32 N Required for mounting one type 32 N ...
device to a 19" rack
Weight: 214 g (packed in plastic bag)
K990A
19" rack adapter, 2 x 32 N Required for mounting two type 32 N ...
device to a 19" rack
Weight: 50 g (packed in plastic bag)
K990B
Mains jumper cable, 0.4 m The cable is equipped with a 10 A inlet
plug and a 10 A inlet socket.
It is used for looping mains power through
when several devices are mechanically
combined into a multi-channel unit. In this
way, the complete unit requires only one
mains power cable.
Weight: 102 g (packed in plastic bag)
K991A
RS 232 bus cable, 2 m
For connecting a device to an RS 232
interface (extension cable with 9-pin
socket and 9-pin plug connector).
Weight: 232 g (packed in plastic bag)
GTZ3241000
R0001
Содержание SSP 120 Series
Страница 2: ...2 GMC I Messtechnik GmbH ...
