Gorgon G303, Руководство по эксплуатации

Страница: 3 / 16

Gorgon G3O3
IN
T
R
O
D
U
C
T
IO
N
INTRODUCTION
We thank you for purchasing
GORGON G303
car alarm system. Please, read this manual carefully
for the sake of proper installation and use.
The system is intended to signal about the attempt of unauthorized penetration inside a vehicle or
any unlawful physical act in its respect. It is also equipped with a built-in device of engine start-up inter-
locking. Furthermore, the system offers you a wide range of options to control the auxiliaries such as radio
pager, lighting, electric locks of the doors and trunk, window lifters etc.
The remote’s radio channel is protected from scanning and interception by the algorithm of dynamic
encoding «KEELOQ»® owned by Microchip Technology Inc. USA.
The system has got six areas of protection:
- along the doors perimeter;
- hood and trunk;
- ignition;
- feeding shut-off;
- built-in bi-level shock sensor;
- external shock (volume, motion) sensor.
When buying this product make sure that the set box is complete, the system
operates properly and the warranty counterfoil is filled in correctly.
The alarm system is installed stationary on the vehicle and is connected to the r12V wiring
with the general negative output of accumulator led out to the mass (ground).
The system complies with the climatic requirements U-2.1 (N-2.1) according to GOST 15150-69
standard and is intended for the use within the environment temperature range of -40 to +85�С. All the
system components should be installed only inside the passenger compartment.
Water resistance of the main unit and remote controls complies with the category IP40 according to
GOST 14254-96 standard.
The system is designed and manufactured in compliance with the State Standard Requirements
GOST R 41.97-99, GOST R 50789-95, GOST R 28279-89, GOST 28751-90, GOST 29157-91, GOST
R 50607-93.
The alarm system GORGON G303 is a sophisticated electronic device and is
intended for professional installation only by the authorized dealers. Please
make sure that the installation certificate is filled in correctly.
Due to the constant improvements in the system construction some slight alterations can take place
in our product. They may be not described in this document, but they will not deteriorate the technical
characteristics of the product.
This product is subject to mandatory certification.
DELIVERY SET
1. Main unit.......................................................................... 1
2. Remote control unit with 3 buttons.................................... 2
3. Main cable....................................................................... 1
4. Limit switch....................................................................... 1
5. Cable with a status LED .................................................... 1
6. Cable with the “VALET” button .......................................... 1
7. Setscrew О4,2х13 ........................................................... 2
8. Ground terminal ............................................................... 2
9. User’s manual .................................................................. 1
10. Installation manual ........................................................... 1
11. Siren................................................................................ 1
12. Package............................................................................1