6
4. Insert the upper portion of the air filter back into the unit,
making sure the let and right edges line up correctly.
Place filter into position.
Maintenance for Units Not in Operation
If the unit will not be used for a prolonged period of time,
perform the following steps:
1. Run the unit in FAN mode for approximately 12 hours to
completely dry the inside of the unit.
2. Turn off the unit and disconnect the power.
HIGH VOLTAGE!
Disconnect ALL power before servicing.
Multiple power sources may be present.
Failure to do so may cause property damage,
personal injury or death.
Remove the batteries from the remote control.
3. The outdoor unit requires periodic maintenance and clean-
ing and should be done by a qualified service technician.
Contact your dealer or servicer.
Checks Before Operation
HIGH VOLTAGE!
D
ISCONNECT
ALL
POWER
BEFORE
SERVICING
.
M
ULTIPLE
POWER
SOURCES
MAY
BE
PRESENT
.
F
AILURE
TO
DO
SO
MAY
CAUSE
PROPERTY
DAMAGE
,
PERSONAL
INJURY
OR
DEATH
.
N
EVER
USE
WATER
TO
CLEAN
THE
INSIDE
OF
THE
UNIT
. E
XPOSURE
TO
WATER
CAN
DESTROY
THE
INSULATION
,
LEADING
TO
POSSIBLE
ELECTRIC
SHOCK
.
1. Inspect the wiring for broken or disconnected wires.
2. Make sure the air filter is clean and installed correctly.
3. Make sure the air outlet and inlet is not blocked if the
unit has not been used recently.
D
O
NOT
TOUCH
THE
METAL
PARTS
OF
THE
UNIT
WHEN
REMOVING
THE
AIR
FILTER
. I
NJURIES
CAN
OCCUR
WHEN
HANDLING
SHARP
,
METAL
OBJECTS
.
