11
6.
TIMER DISPLAY Indicator
: This display area shows
the settings of the TIMER. If only the starting time of
operation is set, it will display as TIMER ON. If only the
ending time of operation is set, it will display as TIMER
OFF. If both operations are set, it will show TIMER ON-
OFF which indicates you have chosen to set both the
starting time and ending time.
7.
FAN SPEED Indicato
r: Press the FAN SPEED button
to select the desired fan speed setting (Auto, Low, Med,
or High). Your selection of Low, Med, or High will be
displayed in the LCD window; Auto fan speed will not be
displayed.
NOTE:
All representations shown on the Display Panel
graphic are for the purpose of familiarizing you with the
display functions. During actual operation, only the rel-
evant functioning displays are shown on the display panel.
OPERATING THE REMOTE CONTROL
INSTALLING/REPLACING BATTERIES
Do not mix old and new batteries. Do not mix alkaline,
standard (Zinc-Carbon) or rechargeable (nickel-Cadmium)
batteries.
The remote control uses two alkaline dry batteries (LR03X2).
1. To install the batteries, slide open the back cover of the
battery compartment and install the batteries according
the direction ( + / - ) as shown on the remote control.
2. To replace the old batteries, use the same method as
mentioned above.
NOTE:
•
When replacing batteries, do not use old batteries or a
different type battery. Do not use a mixture of old and
new batteries. This may cause the remote control to
malfunction.
•
If the remote control is not used for several weeks,
remove the batteries. Otherwise, battery leakage may
damage the remote control.
•
Average battery life under normal use is approximately
6 months.
•
Replace the batteries when there is no answering beep
from the indoor unit or if the Transmission Indicator
light fails to light.
•
Do not dispose batteries as unsorted municipal waste.
Collection of such waste separately for special treat-
ment is necessary.
AUTOMATIC OPERATION
Turn on the power. The OPERATION indication lamp on the
display panel of the indoor unit will begin to flash and will turn
off after flashing 6 times.
1. Use the MODE button to select AUTO.
2. Push the TEMP button to set the desired temperature
within a range of 62°F - 86°F (17°C - 30°C).
3. Push the ON/OFF button to start the air conditioner. The
OPERATION lamp on the display panel of the indoor unit
lights. The FAN SPEED is automatically set and there
are no fan speed indicators shown on the display panel
of the remote control.
4. Push the ON/OFF button again to stop the unit’s opera-
tion.
NOTE:
A. In the AUTO mode, the air conditioner can logically
choose the mode of COOL, FAN and HEAT by sensing
the difference between the actual ambient room tem-
perature and the set temperature on the remote con-
trol.
B. If the AUTO mode is not comfortable for you, the de-
sired mode can be selected manually.
COOL/ HEAT (Cooling only model with no heat) and
FAN Operation
1. AUTO mode setting can be manually overridden by set-
ting the unit for COOL, HEAT or FAN mode.
2. Press the TEMP button to set the desired temperature
within a range of 62°F - 86°F (17°C - 30°C).
3. Press the FAN SPEED to select the FAN mode of AUTO,
HIGH, MED or LOW.
4. Push the ON/OFF button and the operation lamp lights
and the air conditioner starts to operate at your selected
settings. Push the ON/OFF button again to stop this unit
operation.
NOTE: The FAN mode cannot be used to control the
temperature. While in this mode, only steps 1, 3 and 4
may be performed.
DRY OPERATION
1. Push the MODE button to select DRY.
2. Push the TEMP button to set the desired temperature
within a range of 62°F - 86°F (17°C - 30°C).
3. Push the ON/OFF button. The OPERATION lamp lights
and the air conditioner starts to operate in DRY mode at
LOW fan speed. Push the ON/OFF button again to stop
the unit’s operation.
