Popcorn Topping Dispenser
and Base
Model Series 2396 and 2495
Page 7
gmpopcorn.com
4.
DO NOT
use a grounded to un-grounded receptacle adapter (where applicable).
5.
Install unit in a level position.
CAUTION
If the supply cord is damaged, it must be replaced by Gold Medal Products Co.,
its service agent or similarly qualified persons in order to avoid a hazard.
039_080614
Unit Installation
1.
Remove all packaging and tape prior to installation.
2.
Mounting requirements
—
the pedestal mounts to a sturdy, level countertop where
the open rack assembly can be installed in an enclosed area under the counter
(countertop/cabinet to be provided by customer).
Limit cabinet interior dimensions to 3 x 3 feet max. for unit to maintain adequate
cabinet temperature. Allow enough access clearance to cabinet to clean and maintain
the pump, and to add/remove boxes of topping.
Enclosed rolling rack
—
position assembly under the countertop where it can be
connected to the pedestal.
3.
If using a 2495 Base, mounting holes and cutouts are provided.
To prepare countertop for pedestal
—
drill the pedestal mounting holes and cut the
rectangular holes for the power cable and oil tube, drip pan, and remote switch (if
equipped). See Countertop Cutout Dimensions in next section for reference.
Single pedestal and open rack assembly shown for general reference.
6 Prong Power Cord
(connects to 6-prong
receptacle on rack)
Aluminum
Oil Tube
Universal Bag Connector(s)
(connects to topping bag)
6 Prong Receptacle
(connects to pedestal
power cord)
Discharge Oil Line(s)
(connects to aluminum
tube on pedestal)
Power Cord
Heated Line
Receptacle
Control Box
