Popcorn Topping Dispenser
and Base
Model Series 2396 and 2495
Page 10
gmpopcorn.com
Topping Installation
Use maximum of (2) 35 pound boxes of topping for this unit.
IMPORTANT:
DO NOT attempt to operate this system with a bag which has been
removed from the box.
This product is not intended for use with volatile food products
(i.e. real butter).
1.
Load two boxes of pre-heated topping onto the
rack. Gold Medal’s Backroom Warmer
(Item No. 2262) may be purchased for pre-heating the topping.
Mount the box in the rack so the topping bag nozzle is located towards the bottom of
the box to permit a free flow of the topping from the bag.
2.
Remove the cardboard cutout on the box to expose the bag nozzle, and then remove
the cap from the bag nozzle.
3.
Attach the Universal Bag Connector (from the rack assembly) to the bag nozzle as
shown below. Once oil is connected, the unit is ready for use.
Step 2:
Grasp the Bag Nozzle
and slide the Bag Connector
on from the side.
Step 3:
With the hose connector
in place, press plunger forward
to lock.
Step 4:
Connector shown
with plunger fully forward
in lock position.
Bag Nozzle
Plunger OUT in
open position
Universal Bag
Connector
Step 1:
Pull the
Universal Bag Connector’s plunger out until it clicks into the open pos
ition.
Steps to Attach the Universal Bag Connector
