Main shut-off device type 0271 and type 0272
part no. 02 710 50 a
5 / 10
Assembly board option
If required, the HAE can be supplied pre-assembled on an assembly board.
The assembly board can be fixed on an even surface with four screws and anchors (not
included with the delivery), see
about tools and
about the installation
position, see ASSEMBLY.
CONNECTIONS
Inlet,
optional
Trading name and dimensions
acc. to standard
Installation notes
Compression fitting
•
G.22
= Compr. fit. 15, Compr. fit. 18, Compr.
fit. 22
Ball-cone connector DN 16
•
G.26
= Thread G ¾
•
with coupling nut
Spanner size 32
Hexagonal
Screw-in connector
•
G.37 =
G 1/2 or G 3/4
•
For a screw-in connector with O-ring
Compression/separation connector PTV
•
Thread G 3/4
•
Nominal size optionally 15 mm, 18 mm, 22 mm,
•
G.16
1. Loosen coupling nut
2. Remove press connection and press in
with the copper piping
3. Then screw the coupling nut tightly
with the press connection
Assembly in
accordance with
assembly instruction
"Profipress G"
Solder/separation connector LTV
•
G.16
= Thread G 3/4
•
Diameter 18 mm
Spanner sizes
G 3/4 = size 30
Hexagonal
1. Loosen coupling nut
2. Remove solder connection and connect
with the copper piping
3. Screw the coupling nut tightly with the
solder connection
Assembly
according to
DVGW worksheet
GW 2
