Main shut-off device type 0271 and type 0272
8 / 10
part no. 02 710 50 a
START-UP
After the product has been ASSEMBLED and LEAK TESTING has been carried out
successfully, it is immediately ready for operation.
Start up by slowly opening the twist grip to the "Open position".
Observe the assembly and operating instructions of the connected device.
OPERATION
Twist grip in flow direction:
OPEN: Flow to device free
Twist grip not in flow
direction:
CLOSED:
No flow to device
Twist grip in wrong
position:
Always turn a full 90° to
the stop
Do not choose an
intermediate position.
TROUBLESHOOTING
Fault cause
Action
Gas smell
Leaking LPG is extremely
flammable.
Can cause explosions.
Close the gas supply.
Do not use any electric switches.
Do not use a phone in the building.
Ventilate rooms well.
Shut down the LPG system.
Contact a specialised company.
No gas flow.
Gas feed is closed.
Open the valves or shut-off fittings.
The thermal cut-out device has responded.
Replace the thermal cut-out device.
REPLACEMENT
If there is any sign of wear or if the product or parts thereof are damaged, it must be replaced.
When the product has been replaced, observe the steps ASSEMBLY, LEAK TESTING and
START-UP.
If the thermal cut-out device "T" (TAE) has been triggered, the product must be replaced.
When the product has been replaced, observe the steps ASSEMBLY, LEAK
CHECK and START-UP
To ensure that the installation works faultlessly under normal operating conditions, it is
recommended that you replace the device within 10 years of the date of manufacture.
