GoHigh MG3000-R, Руководство пользователя

Страница: 40 / 135

If domain register type is selected, it is recommend to input
SIP server domain name here.
Local sip Port Set local port of SIP protocol. The range is 0 ~ 32767 5060
Enable Registration Yes or No No
Registrar Address Set SIP server domain name and IP address 0.0.0.0
Registrar Receiving
Port
Set SIP server signal receiving port. The range is 0 ~ 32767 5060
Register Period Set register period. The range is 20 ~ 7200s 60
Register period
negociation
It will change the register period parameters according to
server’s message.
- Yes
- No No
Register Type - Select register type:
- Register as Gateway. The server will assign one gateway
username and password to the whole equipment. During
registering, only one register request need be sent which
includes gateway username and password.
- Register with port: Server assign a username and
password to each port. And during registering, each port will
send a register request which includes the username and
password of the corresponding port. Register
with port
Gateway Username Set gateway username if choose register with gateway
Gateway Username Set gateway username if choose register with gateway
Gateway Password Set gateway password if choose register with gateway
Gateway Register
Status
Display current status:
- Not registered
- Registered
Enable Proxy Yes or Not No
Proxy Address Set SI proxy IP address or Domain name 0.0.0.0
Proxy Receiving Port Set SIP server signal receiving port. The range is 0 ~ 32767 5060
Backup Proxy Address Set SIP backup Proxy IP address. When fault to register in
primary server, system will switch to backup proxy server
automatically, and park in backup proxy server. Note:
backup proxy server does not support domain register
0.0.0.0
Backup Proxy
Receiving Port
Set SIP backup proxy server signal receiving port. The
range is 0 ~ 32767 5060
Enable Proxy Keep
Alive Enable Proxy Keep Alive Yes or No. Mainly apply in NAT No
Proxy Keep Alive
interval
Set interval. Heartbeat message is OPTIONS. The range is
20 ~ 7200s 60
Encryption Configuration
Enable
Encryption
Please select encryption or not , according to the server or
the other side product configuration.
- Yes
- No No
Encryption Algorithm Encryption Algorithm
RC4 RC4
Encryption Key Set the key voip
Other Configuration
Send Local Ringback
Tone Yes or No.
1) Yes: receive 18X with SDP, play local ringback tone;
2) Yes: receive 18X with SDP, play local ringback tone;
3) No: receive 18X with SDP, play remote media;
4) No: receive 18X without SDP, play local ringback
tone;
Note: when call from voip to termination and go to pstn,
it always gets 183 response with SDP description. When call
from voip to voip, it always gets 180 message. In order to
compatible with both case. it should be set to No.
No
Send remote Ringback
Tone Yes or No.
- Yes. It sends 183 SDP message to the origination, Yes