Fig 23
Set auto dialing Number
FXO page consists of 2 parts: FXO advanced configuration and FXO configuration. For
details please refer to next Table.
Parameter
Description
Default
FXO Advanced Configuration
Pstn incoming calls
Working Mode
Set FXO working mode:
- Normal Mode
- Auto Mode: if you choose this option, you need click
Display Auto FWD NBR to configure the number. ( refer to
Figure 20 Set Forward Number)
- Dual Mode: only available when sub-cards are all 4S4O or
4S4L
Please refer to chapter 6.3.2
Normal Mode
Normal Mode Play
Record
Set whether play record or not:
- No: when the call is from PSTN to FXO, play secondary
dial tone.
- Yes: when the call is from PSTN to FXO, play the welcome
words which are pre-recorded
Note: when the record is playing, the function is unavailable
No
Enable PSTN CallerID
Set to activate display PSTN CallerID function or not.
No
Ring Times Detected
When call from PSTN to FXO, set the system to detect the
ring times in FXO port, and the range is 1 ~ 5.
In normal mode or Auto mode, if you enable PSTN
callerIDdisplay function, you have to set the ring times
detected bigger than one, in order to guarantee system has
enough time to do the detection.
While in Dual mode, this parameter does not affect the
CallerID display function. The detailed description please
refers to section
6.6
.
1
IP incoming call mode
-
one stage mode
-
2 stages mode
one stage
mode
Содержание MG3000-R
Страница 1: ...VOIP GATEWAY User manual GoHigh Data Networks Technology CO LTD Copyright 2009...
Страница 28: ......
Страница 32: ...Fig 15 SIP QuickSetup Page...